TIMBER WOLF BANDSAW BLADE FULL
TIMBER WOLF BANDSAW BLADE PC

HP blades are only available in 1/8” x 14TPI. RK blades are available in widths from 3/16” - 1” and 8, 10, 14 and 18 TPI. These blades can also be used to cut soft metals. They are also very effective in plywood, particleboard and other similar products where tear-out is a concern. Raker & High Performance (RK & HP): TimberWolf RK and HP tooth-style blades have a very thin kerf and 0-degree rake angle, and are specifically designed for detail work in 1' and smaller kiln dry wood when a very clean finish is required.

TIMBER WOLF BANDSAW BLADE PC

025 thick with a unique set pattern and PC tooth geometry. The uniqueness of this tooth style lies in the fact that it is only. Thin Positive Claw (TPC): Timber Wolf TPC tooth-style blades are designed for straight-line veneer cutting. Not meant for use on three-wheel band saws or any saw with less than a 90' blade length or a wheel diameter of less than 14'.

TIMBER WOLF BANDSAW BLADE FULL

032 thick, have a full alternate tooth set, a rake angle of 6.5 degrees, and they incorporate the unique geometry of Timber Wolf's PC tooth design. These blades are only available in 3/8” x 3TPI, 1/2”x 3TPI and 1/2” x 2TPI. Made in the USA.Īlternate Set (AS): Timber Wolf AS tooth-style blades are primarily used by wood turners and wood carvers for roughing out bowl blanks and milling green logs. The result is a very clean finish on your wood, with an almost polished appearance.

The variable-pitch, positive-claw, tooth design reduces blade resonance through the use of variable-sized teeth. Variable Positive Claw (VPC):Timber Wolf VPC tooth-style blades are designed for straight-line re-sawing in small to large boards, kiln and air dried, and up to 12” wide. Available in 3/16' to 1' widths and 2, 3, 4 and 6 TPI. All of this means you get a long-lasting cutting blade that glides through the wood and produces an excellent finish. The PC also features Timber Wolf's unique 6.5-degree rake angle and special five-tooth set pattern. Bandsaw Blade - 70-1/2' x 1/2' x 4 TPI - Positive Claw. They feature the great finish of a skip tooth blade a at sixty percent of the feed speed capabilities of a hook tooth blade The PC's gullet shape and depth increase sawdust removal and cutting speed, while the milled teeth help to reduce consumption of horsepower. Positive Claw (PC): Timber Wolf PC bandsaw blades are primarily used in kiln-dry wood applications. If you have any questions regarding this information, please do not hesitate to contact us to discuss your needs. Timber Wolf bandsaw blades are available in the following tooth styles.

Timber wolf bandsaw blade